摩托车中英文介绍17.docVIP

USE OF HOT WATER INTENSIFIES THE EFFECT OF THE SALT. USE ONLYPLENTY OF COLD WATER TO WASH AND REMOVE ANTI-ICING SALTUSE OF HIGH PRESSURE WASHING SYSTEMS (OR STEAM CLEANERS) CANDAMAGE THE SEALS, OIL SEALS, BRAKING SYSTEM, ELECTRICAL SYSTEMAND THE SADDLE. DO NOT USE STEAM OR HIGH PRESSURE CLEANING SYSTEMS. DO NOT USE STEAM OR HIGH PRESSURE CLEANING SYSTEMS.CLEANING OF SENSITIVE PARTSBODYWORKTo keep the motorcycle bright, wash it regularly, especially if used in areas with highlevels of pollution or mud. Aggressive stains from tree resins, gasoline, oil, brake fluidor bird excrement in generalmust be removed immediately, otherwise permanent stains on the paint can appear.After washing it is easy to identify marks and residual stains, remove them from thebody using a soft cloth and brand-name, non-abrasive polish, and protect with a protective wax for cars. Periodic care, a thorough cleaning and regular protective wax forthe bodywork preserves the aesthetic quality of the motorcycle over the long term.PLASTIC COMPONENTSIF THE PLASTIC COMPONENTS ARE CLEANED USING AGGRESSIVE AGENTS,THE SURFACE MAY BE DAMAGED. DO NOT USE CLEANING PRODUCTS CONTAINING ALCOHOL, SOLVENTS OR THAT ARE ABRASIVE FOR THE CLEANING P9 使用热水清洗会加剧盐蚀，仅用大量的冷水清洗并清除防冰盐。 使用高压清洗系统(或蒸汽清洁器)会损害密封,密封油、制动系统、电气系统 和车座。不要使用蒸汽或高压清洗系统。不要使用蒸汽或高压清洗系统。 清洗的敏感零件 车体 保持摩托车明亮,经常清洗它,尤其是在多的染或多泥浆的地区使用。一般来自树树脂、汽油、油、制动液或鸟屎等有腐蚀性的污渍，必须立即清除,否则可能出现永久油漆污渍。洗后很容易识别标志和残留污渍,用软布清除和擦亮名牌,保护汽车保护蜡。定期护理,定期彻底清洗并为车体打上保护蜡车体以保持摩托车长期的美观。 塑料零件 如果塑料零件清洗使用有腐蚀的溶剂，则其表面可能受损。不要使用含有酒精、溶剂或磨料的清洁产品进行清洁。