File System Layout Implementation.pptVIP

File System Layout Implementation 2005/03/31 蔡旻均 T10 OSD Objects OSD Object 共四種，目前設計與實作的file system用來儲存Partitions和User Object Root object one root object per OSD logical unit not contain a read/write data area Partition object not contain a read/write data area User objects Collections File system layout的限制 如果設計一個file system layout來儲存T10 OSD spec，會有傳統file system的限制 Object 最大size限制 Object 數目限制 file sytem layout for object storage的特性 Object 的 attribute長度、數目不固定 在Object storage中，物件以flat方式存放 Object ID可由Logic Unit指定 User objects have the Partition_ID of the partition to which they belong and a User_Object_ID that is assigned by the OSD logical unit when the user object is created. Layout Design Super block 存放Partition object attributes Free block bitmap Object data pointer Object attribute pointer Data blocks Block addressing 0 – 11 為direct addressing 直接指向data block 12為 1-indirect addressing 13為 2-indirect addressing 14為 3-indirect addressing 檔案最大~4GB Attributes T10規定的attribute只存value 使用者自定的attribute利用page number和attribute number來定址 Current implementation 先前設計的read/write function依上層SCSI command的功能設計 Current implementation 上層access file system四種動作 Read object data Write object data Get attribute Set attribute Current implementation 預計實作osd_obj_read( )、osd_obj_write( )、osd_obj_set_attr( )、osd_obj_get_attr( )四個function 目前實作進度至osd_obj_read( )、osd_obj_get_attr( ) * * osd_obj_read( ) osd_obj_write( ) osd_obj_create( ) osd_obj_remove( ) osd_obj_set_attr( ) osd_obj_get_attr( ) osd_obj_security( ) osd_obj_capability( ) osd_obj_flush( ) osd_obj_read( ) osd_obj_write( ) osd_obj_set_attr( ) osd_obj_get_attr( ) 目前實作的read/write function依低層file system的動作設計