- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
工程网架结构参数建模和动力特性分析
PAGE
工程网架结构参数化建模和动力特性分析
摘 要
网架结构是较好的大跨度屋盖结构形式,具有空间受力、刚度大、节省钢材、抗振性能好、建筑高度较小、造型美观等。目前,已有大型体育馆、展览厅、影剧院、工业厂房、仓库等千余座工程的屋盖采用网架结构,其广泛的应用前景促使人们对其展开深入研究。本课题就是将体育馆网架结构简化为双层网架结构模型,通过有限元软件ANSYS对其进行分析对计算结果的分析提出结构改进方案,对验证原设计和指导设计修改有重大的意义。
在本课题中通过有限元分析软件自带的APDL语言实现网架的参数化建模,施加约束及加载,可以很有效的缩短网架的建模的时间,简化了网架的建模过程。
通过ANSYS对网架在两种不同的支承情况下的静力分析进行比较,可发现网架的变形规律即网架的变形在X、Y、Z 方向都会交替出现,但在Z方向为主要变形。同时杆件的内力分布得出了不同约束时产生了变号,从而在工程实际施工中应给予考虑。
用模态分析确定了网架结构的十阶模态振型及固有频率,便可以在设计与改进时使网架结构的固有频率避开其在使用过程中的外部激振频率。同时为之后的谱响应分析奠定基础。
通过进一步的随机振动谱分析,采用地震波对网架结构进行计算,找出危险点的响应频率,从而使网架在工程实际情况中避免易产生共振的频率即网架的低阶频率。
[关键词]:双层网架;有限元法;静力分析;模态分析;谱分析
Abstrat
Grid structure is a good large-span roof structure, with space force, stiffness, to save steel and anti-vibration performance and the height of the building smaller and the shape of aesthetics, etc. At present, there are large stadium, exhibition hall, theaters, industrial plants Block, thousands of warehouse roof using the network structure, it is widely used to promote its conduct in-depth studies. This subject is about making grid structure of gymnasium simplify to double-layer grids model,using finite element software ANSYS to analysis,then pose the plan of improved structure according to the results .It has great meaning to test originaldesign and guide design modify.
In self simultaneous APDL language realizes the net rack among the problem by the fact that finite element method analyses a software parameterization build a model, Exert constraint and loading , can be effective shortening the process having covered the time building a model as with a net , having simplified covering a rack as with a net to build a model.
Analyse the comparison being in progress by the fact that ANSYS puts up static force under two kinds different supporting condition to the net, Network can be found deformation that the grid deformation in X, Y, Z direction will take turns, But in Z direction as the main deformation. Meanwhile bar distribution of internal forces come to different con
文档评论(0)