Advance_Inspection(拆除现场预先检查报告).doc

ADVANCE INSPECTION FOR DISMANTLE NODE 拆除现场预先检查报告 Abstract摘要 This instruction describes the purpose, procedure and the method of AXE node dismantle site advance inspection. 该说明书简要说明现场预先检查的目的、流程和方法。 Application应用 This instruction is applied to the GMCC exchange room reloation project. 该说明书进适用于GMCC交换搬迁工程。 Engineers who perform this job must be provided the competence of Ericsson implementation egnieer. 执行预先检查的工程师，须具备爱立信交换安装督导的专业水平。 Contents内容 1 Purpose目的 1 2 PROCEDURE流程 1 3 METHOD方法 2 Purpose目的 There are three mainly porposes of the site advance inspection 现场检查主要目的有3个 To check if the switch site can be dismantled 检查设备是否具备拆除条件 To statistic the type and quantity of the dismantled equipment 统计将要拆除设备的数量与种类 To calculate the work load of the dismantle project 计算设备拆除所需的工作量 PROCEDURE流程 METHOD方法 o We can according to the following aspect to judge if the switch equipment can be dismantled . 设备是否具备拆除的条件主要从以下几个方面判断：with the customer when and who can power off it? 设备是否已经断电？如果仍未断电，则需要和客户确认 何时何人可以断电？ Please make sure we have not affect the all around equipment’s working on. E.g. the main chute’s stability not had been affected. 设备拆除后是否会给周边设备造成影响？比如是否会影 响主线槽的稳固等。 Fill in the associated table EQUIPMENT DISMANTLE CONDITION TABLE 填写相关表格《设备拆除条件表》 1 To count the type and quantity of dismantled equipment includes the following content: 统计将要拆除设备的数量与种类主要包括以下几个内容： The type and quantity of the cabinet 统计机柜的数量与产品型号 The type and quantity of the PCB 统计机柜中的电路板的型号与数量 The type and quantity of the reused cable 统计可重复利用的电缆的型号和数量 The quantity of the dismantled cable chute 统计要拆除的线槽的数量 The quantity of the dismantled peripheral, includes the alarm panel, inverter, terminal etc. 统计要拆除的外围设备的数量，包括：告警板，逆变器，终端等 Fill in the associated table THE DISMANTLED EQUIPMET LIST TABLE and PACKING LIST TABLE 填写相关的表格《设备拆除清单》和《交换设备搬迁工程设备装箱单》 2 To calculate the work load of the equipment dismantle project 计算设备拆除所需的工作量 To calculate the work load according to the statistic result and mak