基于支承套零件工艺及工装设计（含全套CAD图纸）.docVIP

毕 业 设 计论 文 任 务 书 自20年月日 至201年5月2日2012年1月日Abstract This article is carries on the design of the supporting sleeve components machine process, and the clamp designed based on the hydraulic pressure which aimed at some working process, and has carried on another working procedure ordinary jig design. The supporting sleeve components take the boom trestle class components, its main processing surface is the plane and the hole. According to the machine-finishing technological requirement, after following the first surface, the hole principle, and is clear about the hole and the plane processing di