过滤除气说明书.docVIP

TABLE OF CONTENT 1 Overview 3 1.1 About Shenzhen Altech Co., Ltd. 3 2 Drawings for installation and assembling the equipments设备安装图 5 2.1 Installation drawing安装示意图 5 2.2 Assembling drawing装配图 5 3 Description of installation机械安装简要介绍 7 3.1 Before installation安装前 7 3.2 Brief introduction for installation procedure安装程序简要介绍： 7 4 Install ALDU-IC degassing unit安装ALDU-IC除气装置 8 4.1 Install degassing box除气箱的安装 8 4.2 Install the back lift mast kit安装升降立柱提升装置 8 4.3 Install the spinning nozzle安装转子 9 4.4 Install the process control panel安装电动控制柜 10 4.5 Install the heating control panel 安装加热控制柜 12 4.6 Install the gas control panel气体控制柜 14 4.7 Connect all wire and gas hose连接所有的电线和气管 15 5 Install the launder and filter安装流槽和过滤箱 17 5.1 Install the launder流槽 17 5.2 Install the filter过滤箱 18 6 Preliminary test procedure初步空载试车 19 6.1 Important notes注意事项 19 6.2 Preliminary test of the back lift mast升降立柱的空载试车 19 6.3 Preliminary test the turn motor转向电机空载试车 19 6.4 Preliminary test of the nozzle drive motor转子驱动电机空载试车 19 6.5 Preliminary test of the heating elements加热元件空载试车 20 6.6 Preliminary test of gas and process control气体控制柜空载试车 20 7 Operation操作 22 7.1 Prior casting铸造前 22 7.2 Starting and during casting铸造开始和铸造过程中 24 7.3 After casting铸造完成后 27 7.4 Long time stop use长时间停止使用后 27 8 Routine maintenance for the equipment设备的日常维护保养 28 8.1 Degassing box maintenance除气室的维护 28 8.2 Back list mast maintenance升降立柱的维护 28 8.3 Process control panel maintenance电柜控制板的维护 28 8.4 Gas control panel maintenance气体控制板的维护 28 8.5 Spinning nozzle maintenance转子的维护 28 9 Operation and maintenance procedure of ALDU-IC除气装置的操作和维护规程 30 9.1 Assemble and replace the shaft and rotor转子的安装及更换 30 9.2 Assemble the heating protection tube加热器保护套管及其安装 31 9.3 Preheat the degasser预热除气室 32 9.4 Degasser drain empty除气室排空规程 33 9.5 Degassing chamber draining procedure除气室清洁和扒出炉渣规程 35 9.6 Remove the blocking from the protection tube从保护套管除去阻塞的物质 36 9.7 Degasser fishing炉子的捞渣规程 37 9.8 Restart the degassing box after metal solidafication重起凝固后的除气箱 38 9.9