天线增益.docVIP

天线增益天线增益.txt// CMEAS_GAIN dialogCMEAS_GAIN::CMEAS_GAIN(CWnd* pParent /*=NULL*/) 定义四个输入变量，初始频率，终止频率，频率间隔，文件路径 : CDialog(CMEAS_GAIN::IDD, pParent){ //{{AFX_DATA_INIT(CMEAS_GAIN) m_start = _T(); m_end = _T(); m_span = _T(); m_fileroute = _T(); //}}AFX_DATA_INIT}CMEAS_GAIN::~CMEAS_GAIN(){ if (hCom !=NULL) Close_Comport(hCom);}void CMEAS_GAIN::DoDataExchange(CDataExchange* pDX) 将四个变量增加到主菜单对话框中{ CDialog::DoDataExchange(pDX); //{{AFX_DATA_MAP(CMEAS_GAIN) DDX_Text(pDX, IDC_EDIT1, m_start); DDX_Text(pDX, IDC_EDIT2, m_end); DDX_Text(pDX, IDC_EDIT3, m_span); DDX_Text(pDX, IDC_EDIT4, m_fileroute); //}}AFX_DATA_MAP}BEGIN_MESSAGE_MAP(CMEAS_GAIN, CDialog) 设置对话框按钮:左微调，右微调，标准天线，待测天线，仪器设置，测量 //{{AFX_MSG_MAP(CMEAS_GAIN) ON_BN_CLICKED(IDC_GAIN_LEFT, OnGainLeft) ON_BN_CLICKED(IDC_GAIN_RIGHT, OnGainRight) ON_BN_CLICKED(IDC_RADIO1, OnRadio1) ON_BN_CLICKED(IDC_RADIO2, OnRadio2) ON_BN_CLICKED(IDC_GAIN_SETUP, OnGainSetup) ON_BN_CLICKED(IDC_GAIN_MEASURE, OnGainMeasure) //}}AFX_MSG_MAPEND_MESSAGE_MAP()/////////////////////////////////////////////////////////////////////////////// CMEAS_GAIN message handlersvoid CMEAS_GAIN::Poll() { //当前角度查询函数 char* str2com =new char[12] ; char* readstr =new char[1024] ; sprintf(str2com,%c%c%c%c%c%c%c%c%c%c, 0x55,0x55,0x26,0,0,0,0,0,0,0xD0); //查询转台当前的绝对位置坐标 Sleep(500); Write_Comport(hCom,10, str2com); //发送查询命令 Sleep(200); int tmpint ; unsigned long BytesRead; char unsigned tmpcharAZ ; char unsigned tmpintH, tmpintL; int tmp ; tmpint = Read_Comport(hCom, BytesRead, 1024, readstr); if (tmpint){// fprintf(fpklength,%d\t%d\t%d\n,BytesRead,*(readstr + 2),totalk); if (BytesRead = 6) { //接收到6个字节或6个字节以上。 int k=BytesRead/6 ; tmpcharAZ = *(readstr+3+6*(k-1)); //接收最新的数据 if (tmpcharAZ128 ) { tmpintH = *(readstr+3+6*(k-1)) ; tmpintL = *(readstr+4+6*(k-1)) ; tmpcurAZ = float((tmpintH*256+tmpintL-65536.0)/10.0); 考虑溢出 } else { tmpintH = *(readstr+3+ 6*(k-1)) ; tmpintL = *(readstr+4+ 6*(k-1)) ; tmp = tmpintH * 256; tmpcurAZ = float(