研究智能监控工程机械应用系统中英文翻译资料 本科毕业论文设计.docVIP

英文技术资料及翻译 1、英文技术资料原稿 Study on an Intelligent Monitoring Application System of Construction Machinery Qinghui, Jianmin Abstract：In order to monitor construction machinery’s performance and quality, an intelligent monitoring application system is presented in the paper. The system makes site monitoring cell installed on every construction machinery as its terminal, GPRS (general packet radio service) as its network carriers, intelligent monitoring center as controller. The system can supervise the running status and alarm when its works take place abnormality on line on the basis of GPRS network, ARM embedded-system and data-base design based on Lab Windows/CVI. Keywords：Intelligent monitoring; GPRS;ARM ;construction machinery; 1. INTRODUCTION The performance and quality of the construction machinery has a very important influence on the construction schedule. But construction machinery has a higher failure rate because of its complex structure, uncertain load and poor working environment[1]. Therefore, the supervision of the construction machinery’s performance is a sticking point for the stabilization, safety and reliability of construction work. With the social development and the advancement of technology, people have become increasingly demanding on the performance monitoring and fault diagnosis of construction machinery in order to get a higher efficiency and lower consumption of construction project. The new-generation construction machinery not only need integrating operation and intelligent control, but also need cooperating with the whole construction machinery group whose control system is based on network. At present, the traditional construction machinery which is only designed by general electronic control techniques and its traditional regular maintenance can not meet the requirements. So a new construction machinery monitoring system, which can finish the local centralized control, supervision and maintenance, and can also carry out remote-distance mon