称重传感器预加机(机械式)结构设计.docVIP

ee 题 目 称重传感器预加载机（机械式）结构设计 学生姓名 ee 学号 ee 所在学院 机械工程学院 专业班级 ee 指导教师 ee __ ___ __ 完成地点 院内 ___ 2011年 6 月 10 日  称重传感器预加载机（机械式）结构设计 ee （ee） 指导教师:ee [摘要]：本文结合电阻应变式称重传感器在生产检验时，进行预加载过程中采用手动液压加载式进行加载测试，效率低，工人劳动强度大等缺点，开发出一种采用电机自动加载，人工手动夹紧传感器方式的称重传感器预加载机。该预加载机可以通过电气部分的控制，准确高效的执行传感器的预加载任务。预加载机由两部分组成，即夹紧系统和加载系统。夹紧系统采用偏心圆盘自锁进行加紧，夹紧后，通过偏心盘的自锁，稳定可靠的将传感器夹紧。加载系统由伺服电机，联轴器和JWB型滚珠丝杠升降机三部分组成，它能通过电气系统的闭环反馈控制回路，准确的对称重传感器进行预加载，部件紧凑，精度高。通过称重传感器预加载机的开发加快了传感器的生产周期、降低了工人的劳动强度、提高了生产效率、从而曾强了企业的市场竞争力。 [关键词]：称重传感器 预加载 装备设计  Weighing sensor pre load machine (Mechanical) structure design ee （） Tutor: [Abstract]:This combination of resistance strain weighing sensor in the production process of the pre loading inspection, the manual hydraulic loading loading test, low efficiency, high labor intensity of workers and other shortcomings, developed aused motor automatic loading, weighing sensor pre loading machine manualclamping sensor mode. The pre loading machine can control the electrical part of the sensor, pre loading tasks accurately and efficiently. Pre loading machine is composed of two parts, namely, the clamping system and the loading system.The clamping system uses an eccentric disk self-locking are stepping up, after clamping, the self-locking eccentric disk, stable and reliable sensor clamp. The loading system comprises a servo motor, coupling and JWB type ball screw lift is composed of three parts, it can feedback control loop by loop electrical system,pre load, is weighing sensor accurate component compact, high accuracy.Through the development of weighing sensor pre loading machine speed sensorproduction cycle, reduces the labor intensity, improve producti