chapter8 representatjion of architectural solids建图课件.ppt

Chapter 8 Representation of Architectural Solids (建筑形体的表达方法) §8.1 Drafting of Architectural Solids(建筑形体的画法) 1.Solids Analysis(形体分析) 2.Make sure location, Projection Direction and view’s quantity (确定安放位置、投影方向和视图数量) 3.Draw Views(画投影图) 3.Draw Views(画投影图) §8.2 Choices of Views(投影选择) 1.Choice of view numbers(选择投影数量) (1). Use one view to represent a solid (用一个投影表达的物体) (2). Use two views to represent a solid (用二个投影表达的物体门轴铁脚) (3). Use three views to represent a solid (用三个投影表达的物体) (4). Use multi-views to represent a solid (用多面投影表达的物体) (5). Use mirrored projection to represent a solid (用镜像方法表达的物体) 2.Choice of front elevation(选择正立面图) §8.3 Dimensioning of Architectural Solids (建筑形体的尺寸标注) 1.Types of dimensions(尺寸的种类) 2.Steps of dimensioning(标注尺寸的步骤) 2.Steps of dimensioning(标注尺寸的步骤) 2.Steps of dimensioning(标注尺寸的步骤) 2.Steps of dimensioning(标注尺寸的步骤) 3.Placement of dimensions (尺寸配置) §8.4 Sections(剖 面 图) 1.Concepts and drawing(剖面图的概念与画法) (1). Put forward of the question (问题的提出) (2). Production of V direction section (V 向剖面图的产生) (3).Productio of W direction section (W 向剖面图的产生) (4).Sections(用剖面图表示的投影图) 2.Types of sections(剖面图的几种处理方式) (1). Full section(全剖面) (2). Offset section(阶梯剖面) 房屋的剖面图 (3). Broken-out section(局部剖面) (4) .Multilayer broken-out section(分层局部剖面) (5). Half section (半剖面) (6). Rotation section(旋转剖面) 3. Marking of section(剖面图的标注) §8.5 Cuts(断面图) 1.Concepts and drawing(断面图的概念与画法) (1). Production of cuts(断面图的产生) (2). Distinguish of sections and cuts(剖面图与断面图的区别) 2.Types of cuts(断面图的几种处理方式) (1).Removed cut(断面图画在投影图之外空腹鱼腹式吊车梁) (2).Overlapped cut(断面图直接画在投影图轮廓线之内) (2).Overlapped cut(断面图直接画在投影图轮廓线之内) (3).Broken cut(断面图画在杆件断开处) (3).Broken cut(断面图画在杆件断开处) §8.6 Simplified Drawing (简化画法) 1.Symmetrial drawing(对称画法（一）) 1.Symmetrial drawing(对称画法（二）) 2.Omitted drawing of same parts（相同要素省略画法（一）） 2.Omitted drawing of same parts（相同要素省略画法二） 3.Omitted drawing of broken parts（折断的省略画法） §8.7 Interpretation of Arch