Day1.4-CaseStudy1TankSanding-.pptVIP

*. W505 – Control of Hazardous Substances W505-有害物质控制 ? 2008 University of Wollongong and BP International Limited ? 2008 卧龙岗大学及英国石油国际有限公司 Case Study 1 – Tank Sanding Group Exercise 实例研究1—储藏罐砂光 （小组练习） Case Study 1实例研究1 View the slide of a sanding process 观看图片的打磨过程 Identify what processes sources are present 辨认出现的工艺和污染源是什么 Consider how you would evaluate each situation so as to develop a control strategy 思考如何评估每种情况，从而开发控制战略 Case Study 1 cont 实例研究1（续） Identify what control strategies are in place 确认哪种控制战略合理恰当 Indicate what equipment information you may think would help you evaluate the various situations 指出你认为有助于评估各种情况的设备和信息 Prepare a 5 minute group presentation 准备5分钟的小组陈述 Case Study 1 cont 实例研究1（续） Case Study 1 - Background Information实例研究1 --- 背景信息 This case study is about the manufacture of tanks constructed from a material called “Durestos”. It is a composite made of chrysotile asbestos and phenolic resin. 这个案例是关于储藏罐的生产，储藏罐由一种叫Durestos材料构成， Durestos主要成分是温石棉和酚醛树脂 After manufacture, the tanks have to be prepare for painting. This is done by sanding them with hand held orbital sanders. After sanding, the tanks are cleaned by blowing off the dust using compressed air 罐子制作 完成后 ,需要准备喷漆，这一步需要手工用旋转式砂磨机打磨，打磨后用压缩空气吹掉灰尘。 Case Study 1 - Background Information实例研究1 ---背景信息 There is local exhausts ventilation, but this largely ineffective. Operators are issued with 3M 8800 respirators but operators have not been trained in their use. One operator has a beard. Operators wear cotton overalls. 这里有 一个局部排气通风系统，但基本上已经失效。工人都发放了3M 8800呼吸器，但是没有经过使用培训。其中有个员工留有胡须。 员工都穿着棉质防护服。 Washing and changing rooms are available but operators have to walk through the rest of the factory to get to them. Before leaving the area, operators clean their overalls using compressed air lines. 工厂有清洗室和更衣室，但 工人需经过 其他工厂才能到达那里。离开这个区域前，工人需用压缩空气清洁衣服。 Case Study 1 - Background Information实例研究1 --- 背景信息 Personal monitoring has been performed and analysis of the