力传感器自动检系统的设计.docVIP

摘要 本文介绍一种基于单片机的自动压力标定系统，它具有结构简单、精度高、价格便宜、操作方便等特点，可以标定正压力和负压力两种传感器，对于提高压力传感器生产效率有着重要意义。近年来，随着标定技术不断发展与提高，结合现代电子技术与计算机的广泛应用，对压力资料的录取精度也相应提高，为适应电子压力传感器的标定技术要求，确保压力传感器标定所录取资料的准确性，因此有必要研究温度对压力计标定装置的影响。经过充分调研并查阅大量有关资料，以及对现有的压力计标定装置进行了分析对比，选用标准液压源，本文首先研究了压力传感器标定的发展历史，并对温度补偿标定装置的发展概况作了充分的研究，‘分析了现有的压力传感器标定装置的优缺点，提出了一种以新型的标准液压源为主要部件的电子压力传感器自动标定装置，提高了工作效率。为了达到设计要求，本文重点研究了压力自动控制系统原理，并对压力控制系统进行数学建模与仿真的研究。采用斩波运放ICL7650高精度放大器OP07来保证压力传感器的信号放大，采用低噪声可编程增益稳定的CS5534芯片作为核心转换器。着重研究了压力传感器的温度补偿技术并进行了相关的调研。对于温度控制系统，研究了温度测量的相关技术，以及温度信号的采集与输出电路.在实际应用中表明本文所研究的压力传感器标定装置能够完成对压力传感器的精确标定。 关键词：力传感器　 单片机　自动标定 Abstract This paper introduces a microcomputer-based automated pressure calibration system, which has a simple structure, high precision, low cost, easy to operate, can be positive pressure and negative pressure calibration of two sensors, pressure sensors for improving the production efficiency is of great significance. In recent years, with the development and calibration technology continues to improve, combined with modern electronic technology and extensive application of computers, the admission of the precision of pressure data have increased, as underground pressure gauge calibration device must also be updated to improve to meet the electronic pressure sensor Calibration requirements to ensure that the admission pressure sensor calibration accuracy of the information, it is necessary to study the temperature effect on the pressure gauge calibration device. After full investigation and access to a lot of the information, and the existing pressure gauge calibration device were analyzed and compared, use standard hydraulic source, this paper studied the history of development of pressure sensor calibration, temperature compensation and calibration device made the development of profiles the full study, analysis of the existing advantages and disadvantages of pressure sensor calibration device, a hydraulic source