湖北职业技术学院文格式要求.docVIP

题目: 　　学 院： 　　专 业： 班 级： 　　学 号 学生姓名： 　　日 期： 　　目 录 　　摘 要 IV 　　Abstract V 　　前 言 1 第一章： 　　1.1 3 1.1.1 3 1.2 5 1.2.1 1.2.2 1.2.3 1.2.4 1.2.5 　　1.2 第二章： 　　2.1 3 2.1.1 　　 第三章： 3.1 3.1.1 3.1.2 3.2 3.3 3.4 3.5 3.6 　　参考文献 34 　　致谢 35 　　CAD/CAM实践 　　摘 要 　　 　　关键词: CAD/CAM ，发展，制造 　　“Guizhou University school insignia” CAD/CAM practice 　　Abstract 　　Along with the Chinese economy fast development, “China makes” starts to sell the whole world.In 2006, the Chinese manufacturing industry GDP increase in value achieved 1,095,600,000,000 US dollars, for the first time surpass Japan in the total quantity, becomes the world to be listed the second manufacture great nation; In 2007, the Chinese manufacturing industry GDP increase in value amounts to 1,300,000,000,000 US dollars..The Shaanxi Weihe River jig has the main plant is the mechanical electronic profession labor mold specialized production enterprise.Trial produces from the initial research and development to the present CAD/CAM application, designed and makes many models to flush the mold coldly, in domestic has won the good prestige. In recent years, along with the CAD/CAM unceasing application, my factory has produced large quantities of precise ramming mold, specially the multi-location level enters the mold and the multi-location transmission mold, no matter makes the aspect from the design to be possible to compare favorably with with the import mold. My factory applies the CAD/CAM technology start early, not only has applied the CAD technology in the design and the processing, simultaneously in the craft parameter, specially in the complex components geometry parameter also has applied the CAD technology, by the Shanxi Province science and technology hall, National Technical department is awarded “CAD the demonstration enterprise title. In the recent 10 years, already completely used the CAD technology in the mold design, in the part processing have also applied the CAM technology.My f