毕业论文（设计）-电气工程自动化论文.docVIP

电气工程自动化论文 题 目： 基于模糊控制的弧焊电源的研究 专 业： 电气工程及其自动化 摘 要 焊接是现代工业生产中不可或缺的加工方法，而弧焊电源是决定焊接质量的关键因素。逆变弧焊电源是近年来发展起来的一种小型、轻量、高效、节能的弧焊电源。模糊控制方以其适用范围广，控制精度高等特点已广泛应用于生产的各个领域，随着微机技术的发展，将其应用于弧焊电源已经成为可能。本课题以研究出性能优越、经济实用的逆变弧焊电源为目的，将最新的软开关逆变技术和先进的模糊控制方式结合起来应用于弧焊电源的设计之中。 本课题研究的主要内容是基于模糊控制的软开关式逆变弧焊电源的设计，在分析了全桥零电压逆变主电路的运行规律的基础上，详细介绍了主电路的设计方案，包括功率器件的选择、保护以及高频变压器的设计等;本课题采用集成化的微机控制，采用移相PWM控制方式实现逆变器的软开关，所采用的闭环反馈和模糊控制实现了电源的恒流输出，为提高控制系统的可靠性及抗干扰性能，本文采取了一系列有效的措施;按照弧焊电源所需实现的功能要求，本文开发了组成系统控制软件的主程序、中断服务程序及其它一些功能程序，并详细介绍了新型逆变弧焊电源的控制核心一一模糊控制器的设计过程。该逆变弧焊电源的输出具有很高的稳定性和良好的动态性能。 关键词: 逆变弧焊电源 全桥移相零电压 模糊控制 Abstract Weld is an important method in process, welding power is the key factor which determines the quality of weld. Inverter welding power has developed rapidly because of its advantages such as high efficiency, energy saving, small bulk, light weight and multifunction etc. Fuzzy control has been applied in many fields, with the development of microcomputer technology, it becomes realizable to use fuzzy control in welding power The purpose of this subject is to develop high performance, economical and practical welding power. the newest soft-switch invert technology and advanced fuzzy control method combined to design welding power. The main content of this subject is to design a full- bridge shift-phase inverter welding power with fuzzy controller, in the base of analyzing the running principle of full-bridge zero-voltage-switch inverter. The design of main circuit is introduced in detail. This design includes the selection and protection of elements, the design method and calculation of high frequency transformer. In this subject, the low cost and integrated microcomputer are applied. The hardware circuit of this welding power is designed based on philips’s89C58 single chip computer. In order to realize the soft, switch of inverter， the shift-phase PWM control method is adopted. The welding current closed loop feedback control and fuzzy cont