cad2012机使用教程.docVIP

cad2012注册机下载后，按照下面的教程注册即可。 启动安装 Autodesk AutoCAD 2012 2. 输入序列号：666或 667或 400输入密匙：001D1； 3.完成安装，重启CAD；还有可能需要重启电脑； 4.点击激活之后，勾选“我已阅读相关政策”后才可以点击继续； 5.点击继续之后，它会提示你，你的序列号是错误的，此时，点击下一步旁的“关闭”按钮，重新激活 6.进入激活新界面，选择，“我拥有一个Autodesk激活码”；进入如上图的激活界面后，选择第二项，此时，可以启动注册机 7.启动注册机之后，先粘贴激活界面的申请号至注册机中的 Request 栏中；点击 Generate 算出激活码，并点击 Mem Patch 键，否则无法激活；最后复制 Activation 中的激活码至“输入激活码”栏中，并点击“下一步”，进行激活操作 8.上述操作无误后，软件会提示，你已成功激活，表示你已拥有一个完全注册 Autodesk 产品。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beauti