使用说明书-943H蝶阀-翻译解析.doc

（） Special for 3X135MW Coal-fired Power Plant in Sihanouk Cambodia 电动多层次金属硬密封蝶阀 Motor-Operated multi-tiered metal hard sealing butterfly valve D943H 使 用 说 明 书 Operation Instruction 阀门集团有限公司 Valve Group Co.,Ltd 使用说明书 Operation Instruction § 概 述 该阀是我厂按最新标准设计，在吸收消化国内外先进技术的基础上，而研制成功的一种大口径蝶阀结构上做了改进，性能更加可靠，广泛用于介质为低、中、高压的水、泥沙水、海水等的泵站管路中，安装在水泵出口处，作截止、调节之用。caliber butterfly valve that designed according to newest standard upon digesting and assimilating advanced technology from home and foreign, which is improved in structure but with more reliable performance, is widely used to pump pipe with media of water, cement sand and sea water in low, middle and high pressure, installed to outlet of water pump, used to close and regulate flow. 电动法兰式三维偏心多层次金属硬密封蝶阀结构特点：三偏心结构 由于该阀采取了三偏心结构，从几何形状上使得阀座与蝶板密封圈在阀门整个开关过程中完全脱离，这一独特的偏心组合，既利用了凸轮效应，又完全消除了摩擦，从而实现了阀门在90°启闭行程中，阀座与蝶板上的多层弹性密封圈之间无摩擦消除了因密封面的磨损而产生阀门泄露的可能，大大延长了阀门的使用寿命，阀门密封面上的比压可通过外力矩的增减进行作任意调整，使其密封更为可靠，绝不会出现过关现象。 2、多层次弹性金属密封圈真空蝶阀利用安装在蝶板上的多层次弹性密封圈来实现真正的零泄漏。蝶板上的多层次弹性密封圈是由不锈钢片和优质石棉板一层一层相互叠加压制而成。它即具备金属密封副的硬度及较好的抗摩擦性能，又具有软密封副的弹性及较好的密封性能，当外力阀杆通过施加扭矩时，也使密封圈径向压缩和柔动，而密封圈与阀座接触面是“锥中锥“的结构，两个锥体均为斜锥体，密封圈与阀座之间的接触角产生轻微的“楔块效应”，使密封圈发生柔动和径向压缩。正是由于密封圈与阀座之间的均匀接触及密封圈的柔性使阀座周边产生均匀荷载，从而用最小的力矩实现最严密的切断，致使阀门达到零泄漏。stainless steel plate and excellent asbestos board one by one. It equips hardness of metal sealing with better antifriction performance, but also has elasticity of soft seal with better sealing performance. When the valve rod exert torque, but also make seal ring compress and move vertically, the interface between seal ring and valve seat is “cone-shaped” structure, two cones are both oblique cones, the contacting corner will produce light wedge effect, make seal ring move and compress vertically. For the uniform contact between sealing ring and valve seat, and the softness of seal ring make valve seat produce homogeneous loading, so as to realize most stringent with minimum torque, reach zero leakage. 3、阀门阀轴底部密封结构hermetically-sealed