GNS3配置VCS详细步骤by imkh.doc

GNS3配置VPCS详细步骤by imkh VPCS：Virtual PC Simulator(虚拟电脑模拟器) ? 1.安装好GNS3-0.8.3-all-in-one后，来到它的安装目录C:\Program Files\GNS3下，会找到一个cygwin1.dll的文件 ? 把它复制到C:\Program Files\GNS3\vpcs目录下 ? ? 打开你的开始菜单中的VPCS，运行它。 ? VPCS就可以成功运行了。你还可以输入 ? 查看各种命令的用法。 ? 2.配置GNS3与VPCS，让它们关联起来。 ? 打开你的GNS3，选择“编辑标示符管理器”， ? 进入到标示符管理器管理器界面。具体操作看图示说明。 ? 现在可以在GNS3中看到computer了。 ? 打开你的VPCS，输入show命令。可以看到有9个VPCS终端可以使用，这里有两个重要的参数是 LPORT和RPORT，等下会用到这两个参数的值。 ? 把computer和路由器拖到控制面板中，准备搭建拓扑。 首先对C1进行配置 具体配置看图示说明。 ? 3.测试GNS3与VPCS的连通性。拓扑图如下。 ? VPCS中配置IP地址的方法：ip 本机ip地址 掩码位数 网关，如ip 10.1.1.2 24 10.1.1.1 ? ? 可以ping通路由器，实验成功。(此处省略了路由器的ip配置过程) ? ? ? ? ? ? the drawings, first to become familiar with the drawings, mainly about the following aspects: 1) pages of drawings and diagrams, maps; 2) a comprehensive understanding of drawing; 3) finding of design-driven dimensions (), do not resize and adjust the size; 4) questioned the drawings; 5) develop buries a construction programme and technical clarification; 6) clear corners and special treatment; 7) controlled construction drawings to verify construction scheme and design. (2) at the construction site to find subject planted area: various engineering, first on the scene to find planted area, it must first understand the curtain wall installation section, and some projects are all curtain wall, the entire project is a region-wide, only partial walls, the zone is local. (3) identify the axis positioning: positioning the drawings shown in axis compared with the actual construction site to find out exactly where the axis positioning, axis positioning function are: 1) to help determine the origin of curtain walls; 2) acceptance of the installation is accurate; 3) adjust errors, and determine the error range. (4) find anchor points: according to site to find the exact location of the axis, according to the drawings provided by the content determine the positioning point; number of anchor points shall not be less than two points. Repeated measurements d