如何查看计算机P地址.docVIP

如何查看计算机IP地址 查看计算机的IP地址有多种方法，在这里介绍三种常用的查看方法 第一种查看计算机IP地址方法： 用鼠标左键单击开始菜单的“运行”选项； 在弹出的运行对话框中，输入“command”或者“cmd”命令，鼠标左键单击“确定”按钮； ③、在白字黑底界面的指针闪烁处键入“ipconfig” 命令，按回车键； OK，你可以看到本机的IP地址了，例如上图中显示的IP地址为10.8.10.13。 第二种查看计算机IP地址方法： ①、鼠标左键单击屏幕右下角任务栏的“本地连接”两个小电脑图 ； ②、在出现的对话框中，鼠标左键单击“属性”按钮； ③、在出现的对话框中，鼠标左键双击“Internet协议（TCP/IP）”； ④、OK，在弹出的对话框中，你便可以看到本机的IP地址了，例如上图中显示的IP地址为10.8.10.13。 第三种查看计算机IP地址方法： ①、用鼠标右键单击桌面上的“网上邻居”； ②、再右键弹出的对话框中，用鼠标左键单击“属性”选项； ③、在“网上邻居”属性对话框中，用鼠标右键单击“本地连接”； ④、再右键弹出的对话框中，用鼠标左键单击“属性”选项； ⑤、在出现的对话框中，鼠标左键双击“Internet协议（TCP/IP）”； ⑥、OK，在弹出的对话框中，你便可以看到本机的IP地址了，例如上图中显示的IP地址为10.8.10.13。 the drawings, first to become familiar with the drawings, mainly about the following aspects: 1) pages of drawings and diagrams, maps; 2) a comprehensive understanding of drawing; 3) finding of design-driven dimensions (), do not resize and adjust the size; 4) questioned the drawings; 5) develop buries a construction programme and technical clarification; 6) clear corners and special treatment; 7) controlled construction drawings to verify construction scheme and design. (2) at the construction site to find subject planted area: various engineering, first on the scene to find planted area, it must first understand the curtain wall installation section, and some projects are all curtain wall, the entire project is a region-wide, only partial walls, the zone is local. (3) identify the axis positioning: positioning the drawings shown in axis compared with the actual construction site to find out exactly where the axis positioning, axis positioning function are: 1) to help determine the origin of curtain walls; 2) acceptance of the installation is accurate; 3) adjust errors, and determine the error range. (4) find anchor points: according to site to find the exact location of the axis, according to the drawings provided by the content determine the positioning point; number of anchor points shall not be less than