整合元件陶瓷电容卷装站制程规范精讲.doc

1.0 目的 陶瓷電容捲裝站製程規範 2.0 範圍 整合元件 3.0 權責 PE-作業規範定義 PD-作業規範執行 4.0 作業內容 A.台南廠區作業： 測包機之上熨斗及下熨斗作業溫度 Operating temperature of top and bottom iron 1.1 熨斗溫度影響上下膠帶與紙帶/塑膠載帶間的封合品質 Operatorting temperature of the iron shall affect sealing quality between carrier tape and cover and bottom tape. 1.2 上熨斗/下熨斗溫度設定 (依下表設定熨斗溫度) Operating temperature of top and bottom iron (according to below table) 1.3 燙斗實際工作溫度必須在設定溫度上下限 ±5 ℃內。 Working temperature tolerance must be controlled within ±5 ℃ of setting temperature. 溫度表超溫設定為±5 ℃ Thermometer alarm set up ±5 ℃ 產品尺寸 Product dimension 包材Material 包裝機型Machine type 上熨斗溫度 Temperature of top iron 下熨斗溫度 Temperature of bottom iron 01005(0402) 紙帶(press)Paper tape TWA-6606 190~210 oC 01005(0402) 塑膠載帶Emboss tape TWA-6606 125~145 oC 0201(0603) 紙帶(punch) Paper tape TWA-6600 TWA-6601 130~170 oC 160~180 oC TWA-6604 170~220 oC 160~200 oC 0201(0603) 紙帶(press)Paper tape TWA-6604 170~220 oC TWA-6601 170~220 oC 0402 (1005) 紙帶Paper tape TWA-6002 140~180 oC 140~160 oC 0402 (1005) 紙帶Paper tape TWA-6600 TWA-6601 160~220 oC 160~190 oC 0603 (1608) 紙帶Paper tape TWA-6600 TWA-6601 170~220 oC 160~220 oC 0603 (1608) 紙帶Paper tape TWA-6002 160~180 oC 160~220 oC 0805 (2012) 紙帶Paper tape TWA-6002 170~250 oC 160~220 oC 0805 (2012) 塑膠載帶Emboss tape TWA-6002 160~180 oC 1206 (3216) 紙帶Paper tape TWA-6002 170~250 oC 160~220 oC 1206 (3216) 塑膠載帶Emboss tape 手動機 manual machine 145~160 oC 1808 (4520) 塑膠載帶Emboss tape 手動機 manual machine 145~160 oC 1812 (4532) 塑膠載帶Emboss tape 1.4 上烙鐵溫度對拉力影響對照表（Top iron temperature-peeling force reference table） 機型(M/C type)：6002 調整後溫度 Justified temperature 原先溫度 Pre-temperature 160oC 170oC 180oC 160oC 0g +3g +6g 170oC -3g 0g +3g 180oC -6g -3g 0g 機型(M/C type)：6600, 6601 調整後溫度 Justified temperature 原先溫度 Pre-temperature 190oC 200oC 210oC 220oC 190oC 0g +5g +