2.5如何通过串口来进入管理页面.docVIP

2.5 如何通过串口来进入管理页面 2.5.1 在PC上点击“开始”－“所有程序”－“附件”－“超级终端” 2.5.2 打开超级终端后，请选择使用“COM1” 2.5.3 在COM1属性里，“每秒位数”请选择“115200”，“数据流控制”请选择“无”，点击“应用”、“确定”，然后回车即可。 2.5.4 Example The command hierarchy and the help utility is demonstrated in the following example: Commands at top level: System – System commands Console – Console commands Port – Port commands MAC - MAC table commands VLAN – VLAN commands Aggregation – Aggregation/Trunking commands LACP – IEEE802.3ad Link aggregation commands RSTP – IEEE802.1w Rapid Spanning Tree commands User Group – User Group commands QoS – QoS commands Mirror – Mirror commands