FANUC数控床制作零件.docVIP

FANUC 数控车床。 一、手动铣端面。 二、用直径24的麻花钻钻孔。 三、切削内孔并切内螺纹。 O 0501 G99; G28 U0 W0; G97; T0404; M04 S1200; M08; G00 X30. Z10. ; G01 Z2. F0.1; G71 U1.0 R1.0 S1200; G71 P10 Q20 U-0.5 W0.2; N10 G01 X32. Z0. ; X26. Z-10. ; N20 W-22. ; S1500; G70 P10 Q20; 四、车左侧外圆面。 O 0502 G99; G28 U0 W0; G97; T0101; M04 S1200; M08; G00 X65. Z10. ; G01 Z2. F0.1; G71 U1.0 R1.0 S1200; G71 P10 Q20 U0.5 W0.2; N10 G01 X38. Z0. ; X42. Z0. ; W-22,; X42. ; U4. W-2. ; X45. ; G00 X100. Z100. ; G28 U0 W0 ; M09; M30; 五、零件掉转，加紧，切外圆面。 O 0503 G99; G28 U0 W0; G97; T0101; M04 S1200; M08; G00 X65. Z10. ; G01 Z2. F0.1; G71 U1.0 R1.0 S1200; G71 P10 Q20 U0.5 W0.2; N10 G01 X0. Z0. F0.1 ; G03 X24. Z-12. R12. ; G01 X48. ; G03 X48. W-6. R3. ; G01 U-6. W-10. ; N20 W-16. ; G00 X100. Z100. ; T0202; S1500; G00 X65. Z10. ; G70 P10 Q20; G00 X100. Z100. ; TO808; S400; G00 X55. Z33. ; G01 X38. F0.05; G03 X42. W-2. R2. ; G01 X60. ; G00 X100. Z100. ; G28 U0 W0 ; M09; M30; 2010-5-01 school)], 4 4 house building as well as more than 1000 copies of books, more than 10 kinds of collection of newspapers and magazines, fires burnt down. In 1938, the Japanese learned that the national Government established in XI Tang Tomb rotten clip taxes, tax officers live in 8 of Yan Dong village farmers home, troops at night, Yao was burned several houses. 1938 new morning of September 18, the Japanese team went to the countryside sweep from the kaiyang village line to Tung Yang Jia Qiao yan Temple wall and met Yang Jia溇 Zhou Dana (male) weeks because of long-term illness and cant work in the fields, the Japanese see his face from scratch without calluses, regard him as Shina, thrust a knife at the scene of his death. The body was stabbed 7 times, wound 13. The same day, Trang bang village heard the Japanese come to mop-up are hiding, mother of 9 Zhou Guanbao Zhang Aying to drill a dry mound, was discovered by the Japanese, a shot in the end. The same day, is 7