ORCAD 中次性修改元件属性.docVIP

ORCAD 中一次性修改元件属性 [ 整理编辑:admin |?时间:2008-08-19 02:09:06 | 浏览:193次 ] ?在电路的绘制过程中有时需要修改元件的属性,现在介绍如何应用一次性修改方法进行修改,应用该方法可以大大提高我们的工作效力,这是我工作中总结的,现同大家分享.??? 我以例举一次性修改元件封装为例子. Step1:打开原理图,在管理窗口中选中原理图文件,如下? Step2: 执行Edit/Browse/Parts? Step3: 直接点OK? Step4: 现在出现元件浏览窗口,在Reference 中选中需要修改的元件,这里是电容? Step5: 执行Edit/properties(CTRL+E),如下? Step6: 选中PCB Footprint? Step7: 将选中的PCB Footprint Remove,然后点 New…;且按下面填写? Step8: 点OK,如下? Step9: 确定后退出,这时我们可以看到修改后的结果,如下? ??? 到现在,我们说选的元件封装都按照我们的要求被修改了,其实它不单独可以修改封装,还有网络,这对我们需要进行大量对原理图的元件属性修改时提供了很多方便!希望对大家有用. development in order to protect a host of attractions and historical sites, as well as to maintain the economic vitality of the downtown area. Figure 5.1-5 figure 5.1.4 Washington mass transit network to support implementation of effective transport demand management policies to reduce urban traffic congestion and public transport priority was in the early 1960 of the 20th century by the planners first proposed in Paris, France, and in Europe and other major cities to operate has been the formation of the rich content system. Public transport priority consists of two aspects: one is on the bus to help. ... 5.1-7 Park and ride systems 5.1.5 typical case Hong Kong-Japan Sapporo, Sapporo is a Japan Hokkaido central parts of cities, Japans fifth largest city. Area of 1121km2 in the city, a population of 1.921 million. In addition is the administrative center of Hokkaido, Sapporo is Hokkaidos industrial and commercial center, in 1972, hosted the 11th Winter Olympic Games. 3 JR Sapporo rail transit line 3 metro and 3 tram lines, Sapporo in the urban development process combined with Center of construction of subway construction and residential development, and support the development of the region. Prior to 1971, Sapporo, Japan Hokkaido local Centre in the urban development process, in response to the rapid growth of the city centre traffic demand, building trams. 1981 years ago for holding the winter Olympic Games as an opportunity t