STM32的AC和DAC问题集锦.docVIP

1、STM32的DAC转换是什么开始的呢？ 问：STM32的DAC转换是什么开始的呢？如何利用DAC输出一个脉宽的控的单脉冲呢？ 答：DAC是通过写入DAC输出寄存器开始的。另外，如果想要脉冲，使用TIM功能。 2、STM32的DAC输出电压 问：DAC的输出电压是如何调节的呢，输入的数字量和输出的电压怎么不成比例呢，输出电压不符合数据手册上提供的公式（DAC输出 = VREF X DOR / 4095），求高人指点，程序如下：#include stm32f10x_lib.h#define DAC_DHR8R1_Address 0DAC_InitTypeDef DAC_InitStructure;DMA_InitTypeDef DMA_InitStructure;ErrorStatus HSEStartUpStatus;uc8 Escalator8bit[50] = {0x0, 0x33, 0x66, 0x99, 0xcc, 0xff};void RCC_Configuration(void);void GPIO_Configuration(void);void NVIC_Configuration(void);void Delay(vu32 nCount);int main(void){#ifdef DEBUGdebug();#endifRCC_Configuration();GPIO_Configuration();NVIC_Configuration();TIM_PrescalerConfig(TIM6, 0xF, TIM_PSCReloadMode_Update);TIM_SetAutoreload(TIM6, 0xFF);TIM_SelectOutputTrigger(TIM6, TIM_TRGOSource_Update);DAC_InitStructure.DAC_Trigger = DAC_Trigger_T6_TRGO;DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable;DAC_Init(DAC_Channel_1, DAC_InitStructure);DMA_DeInit(DMA2_Channel3);DMA_InitStructure.DMA_PeripheralBaseAddr = DAC_DHR8R1_Address;DMA_InitStructure.DMA_MemoryBaseAddr = (u32)Escalator8bit;DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;DMA_InitStructure.DMA_BufferSize = 6;DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;DMA_InitStructure.DMA_Priority = DMA_Priority_High;DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;DMA_Init(DMA2_Channel3, DMA_InitStructure);DMA_Cmd(DMA2_Channel3, ENABLE);DAC_Cmd(DAC_Channel_1, ENABLE);DAC_DMACmd(DAC_Channel_1, ENABLE);TIM_Cmd(TIM6, ENABLE);while (1){}}void RCC_Configuration(void){RCC_DeInit();RCC_HSEConfig(RCC_HSE_ON);HSEStartUpStatus = RCC_WaitForHSEStartUp();if(HS