DG型离心泵的设计.docVIP

DG型离心泵的设计 摘要 离心泵是一种用量最大的水泵，在给水排水及农业工程、固体颗粒液体输送工程、石油及化学工业、能源工程和车辆工程等国民经济各个部门都有广泛的应用。由于应用场合、性能参数、输送介质和使用要求的不同，离心泵的产品及规格繁多，结构形式多种多样。本次设计首先对泵的工作原理、结构特点、工艺特性等进行调研，尤其对高压锅炉给水泵进行了充分的研究，在对泵的基础理论较为了解的基础上，对其进行设计。在泵的设计中，选择设计系数法。该设计方法建立在对现有大量性能良好的泵的统计资料基础上，同时又简单合理。主要分为电动机的选择依据、叶轮设计、轴的设计、联轴器的选择等几个部分。采用三维设计软件对水泵的一些关键部件进行三维建模，如叶轮、轴等。给出它们的三维实体模型，并对他们进行装配。设计的最后，对轴以及其他关键部件进行了充分的强度校核。 【关键词】毕业设计；DG型离心泵；设计系数法；三维设计 Abstract The centrifugal pump is a maximum amount of water pumps, have wide applications in various national economic sectors of water supply, drainage and agricultural engineering, solid particles, liquid transportation engineering, oil and chemical industry, energy, engineering and vehicle engineering. Applications, performance parameters, transmission media and use requirements, products and specifications of the centrifugal pump range, the structure of a variety of forms. Research design first pump works, structural characteristics, process characteristics, especially for high-pressure boiler feed pump adequate research in better understanding of the basic theory of the pump based on its design. Pump design, selection of design coefficient method. The design method is based on statistical information on the basis of the existing large number of good performance of the pump at the same time simple and reasonable. Is divided into selected on the basis of the motor, impeller design, shaft design, choice of coupling of several parts. The three-dimensional design software, 3D modeling, such as some of the key components of the pump impeller, shaft and so on. Given their three-dimensional solid model, and their assembly. Final design, right axis as well as other key components of adequate strength check. [Key words] graduation design; DG centrifugal pump; design coefficient method; three-dimensional design 任务书 设计数据 已知条件：单级扬程80m ，流量85 ， 转速2950 , 轴的额定功率为164KW。 设计内容 1．轴的设计 2.比转速计算 3.功率估算 4.进口尺寸 5.叶轮外径 6.叶轮 7.轴的强度校核计算 8.电机功率计算及电机选择 9.联轴器选用 3.设计方法 设计系数法：基于相似理论，是