1000t线路板废水处理工程设计方案说明书--毕业设计论文.docVIP

本科毕业设计（论文） 1000t/d线路板废水处理工程设计 学 院 环境科学与工程学院 专 业 环 境 工 程 年级班别 20（）310X008XXX 学生姓名 指导教师 20XX年月日 1000吨/日线路板废水处理工艺设计,各类进水水质状况如下:有机废水CODCr=1800mg/L,SS=900mg/L，流量为120 m3/d；含络合物的废水CODCr=300mg/L，Cu=50mg/LCu2+=80mg/L，CODCr=300mg/L， 640m3/d；60m3/d。（DB44/26-2001）pH=6-9；CODCr=90mg/L；SS=20mg/L；Cu2+=0.5mg /L；CN=0.3mg/LAbstract The lesson of this graduate design is the process design for 1000 ton/day circuit pl- ank wastewater.The quality of the influent organic wastewater is: CODCr=1800 mg/L, SS=900 mg/L,Q=120 m3/d; The quality of the influent wastewater that contain chel- ated copper is: CODCr=300mg/L,Cu=50mg/L,Q= 180m3/d;The quality of the influent wastewater that contain copper ion is: Cu2+=80mg/L,CODCr=300mg/L,Q=640m3/d.The quality of the influent wastewater that contain cyanide is:CN=100-200mg/L,CODCr= 250mg/L, Q=60m3/d. As a result, the quality of the discharged water can meet the Guangdong province emission limits of municipal sewage and B emission standard limits .The quality of the effluent water is: pH=6-9;CODCr=90mg/L;SS=20mg/L; Cu2+=0.5mg /L;CN=0.3mg/L. The circuit plank manufacturing waste water, which heavy metals copper ions pollution is main,its composition is complicate and its PH varies very big. Should be collected separately after pretreatment centralized. Handling complex chemical replacement, if the conditions permit, the dilution mixing method could also be used, such savings Pharmacy, reduce costs. Acidification by organic waste and in response and then regulate the inflow pool and then coagulation treatment. PCB wastewater sludge containing copper and other precious metals, recyclable waste to treasure. According to these characteristicseses of the circuit plank waste water, this design adopts the mathod that classification handles and precipitation handles for the main craft processing the circuit plank waste water. That method has the characteristics of simple craft,effective handle,simple struct