关于在热电联产系统中废热回收的换热器的设计译文-本科毕业论文.docVIP

译 文 原文题目: DESIGN OF HEAT EXCHANGER FOR HEAT RECOVERY IN CHP SYSTEMS 译文题目： 关于在热电联产系统中 废热回收的换热器的设计 学 院： 电子信息学院 专业班级： 过程装备与控制工程 学生姓名： 尹梦原 学 号： 41203070210 原文： Design Of Heat Exchange For Heat Recovery In CHP Systems Lin Fu;;Yan Li;;Shigang Zhang;;Yi Jiang Frontiers of Energy and Power Engineering in China Abstract-The objective of this research is to review issues related to the design of heat recovery unit in Combined Heat and Power (CHP) systems. To meet specific needs of CHP systems, configurations can be altered to affect different factors of the design. Before the design process can begin, product specifications, such as steam or water pressures and temperatures, and equipment, such as absorption chillers and heat exchangers, need to be identified and defined. The Energy Engineering Laboratory of the Mechanical Engineering Department of the University of Louisiana at Lafayette and the Louisiana Industrial Assessment Center has been donated an 800kW diesel turbine and a 100 ton absorption chiller from industries. This equipment needs to be integrated with a heat exchanger to work as a Combined Heat and Power system for the University which will supplement the chilled water supply and electricity. The design constraints of the heat recovery unit are the specifications of the turbine and the chiller which cannot be altered. Keywords: heat exchangers；Power systems；Combined Heat and Power INTRODUCTION Combined Heat and Power (CHP), also known as cogeneration, is a way to generate power and heat simultaneously and use the heat generated in the process for various purposes. While the cogenerated power in mechanical or electrical energy can be either totally consumed in an industrial plan