Main_challenges_of_Philips_Lighting.doc

Main challenges of Philips Lighting From conventional light sources to solid state lighting (LED) The concept of LED source system is very different from the traditional design, the need for more technical and professional assistance. Power Conversion: LED either the original device special production methods are generally DC drive components, and general life AC power source is AC power, AC wall outlet into DC to be applied for, or used in the LED AC type LED components, effective to convert the AC power LED needs a large low-voltage DC power source. Drive and control circuits: LED drivers require auxiliary electronic circuits, has the purpose of high efficiency, and the general design of the incandescent lamp dimming, to the LED light source to achieve new, it must be adjusted by the DC power supply control, electronic circuit complexity compared to conventional light sources will be even more complex. Thermal treatment: LED dot light source for the original device, light will be concentrated in the single-point temperature, while the component itself, in addition to the original device designed for thermal enhancement, reaching from the body heat, but heat will still have an excessive concentration of positions in the light spots problem, namely the test of junction temperature control capabilities, which must be used with active / passive cooling design work to extend the lamp life of purpose. Optical devices: As the LED light source is a compact and efficient point-like light source, although with broad regulatory effect of color output, energy efficiency and performance is excellent, but after living with the requirements of lighting the continuing need for uniform and stable optical-type lighting, LED light source that is too concentrated to be through optical devices or lenses, optical materials have similar light the traditional lamp-based performance. 2. from component and product to applications and solutions focus Color matching LED chips are p