ARGO_70RM_ingl.docVIP

ARGO 70 RM  1.0 BASIC SPECIFICATIONS 1.1 Structure The structure is made of a base with a sliding upright in its rear section. Both are in electrowelded steel duly stabilised after each work phase to ensure that there is no interior tension; they are sized to guarantee stability and precision during machining operations. 1.2 Axes Sliding The axes slide on high precision, robust, reliable linear guide-ways with recirculating ball blocks equipped with oil scrapers and with medium/high preloading. 1.3 Axes Movement The independent axes are controlled by brushless Yaskawa servomotors by means of: Pinion, rack and mechanical system for backlash recovery for X axis (longitudinal) High precision ground recirculating ball screw and preloaded lead for Y (transversal) and Z (vertical) axes. The Z axis drive is equipped with an electro-magnetic brake which is enabled if mains power is cut-off. The digital servormotors not only allow for short, optimal positioning and adjustment times, but also high head positioning speed. The position of the axes is detected by means of a rotating transducer. Spindle Head Constructed with a system of crossed tables in lightweight alloy to obtain a reduction in weight, high resistance to loads and accuracy in the mechanical work they perform, all at the same time. The solution used has considerable advantages in terms of machining precision and maintenance. Electrospindle Designed by Fom Industrie, this electrospindle ensures important performances, both at low number of revolutions as well as at high speed, to satisfy the increasing needs in terms of flexibility. The 4kW electrospindle is equipped with constant torque, rotation speed up to 12,000 rpm, adjustable, positioning 0°/ 90°/ 180° for machining the three profile sides, forced air cooling, ISO 30 DIN 69871 tool coupling and relative presence detecting micro-switch. The tools are locked into place mechanically, and released by means of a pneumatic syste