(截止20111026最新版)CLARIFICATION ON HTC PROPOSAL FOR 2x46 MW SGTs.docVIP

NO. UTILITY CONTRACTORS COMMENT VENDORS REPLY CONCLUSION A GENERAL: The number of supplied STGs shall be 2 complete units which is necessary to be mentioned in the proposal). All of the quantities mentioned in the proposal will be considered as a required quantity for one unit. The proposal shall be revised in accordance with POWER GENERATION STEAM TURBINE MATERIAL REQUISITION document. And Deviation with this document shall be submitted by vendor. Deviation with HEI related standards like Steam Jet Vacuum system and Steam Surface Condenser shall be submitted. A General Arrangement Drawing (Plan Sections) shall be submitted. List of spare parts according to STG MR with the related price for each item shall be supplied. Also, list of recommended spare parts for commissioning operation shall be submitted in a separate list (including the price for each item). Document List shall be submitted. B PROCESS: Only two kind of steam (MP and LP) are available at Refinery, which can be used for Ejector system (motive, first and second) and the necessary control valve and desuperheater shall be supplied by vendor (if required). The vendor shall provide and supply any facilities or equipment to use the available steam for ejectors and sealing system. Only one kind of steam (HP inlet and LP exit) are available which can be used for condensate extraction pumps driver (steam turbine). The steam turbine and the necessary control valve and desuperheater shall be supplied by vendor (if required). The vendor shall provide and supply any facilities or equipment to use the available steam for the condensate extraction pumps driver (steam turbine) and all auxiliaries. Please submit HM balance for the STG in all of requested load cases mentioned in document “3034-ED-PR-HMB-0880-A1 Heat Mass Balance power and steam”. HTC shall confirm the capability of STG operation in all of design verification cases. C EQUIPMENT: Scope of Supply: In HP Steam