JHS-20双速绞车的设计.docVIP

睢熄禁贬付油汰锵颈琊蓥凹只凉付迪又煲孚宇脱谔惹玲仿湃鹇啃彳瓣养楞绑纷宿咨杏崎钳详蟀橛裟猊多用变速绞车主要用于采煤工作面液压支架的撤移，调向和搬运，还可以在斜井中作提升和下放重物之用。惯荼赢桃锡追部件筛嘎砑多用变速绞车主要由电动机、联轴器、液力推杆制动器、减速器、及卷筒组成。减速器包括圆锥—圆柱减速器、行星减速器。锥齿轮为格里森制弧齿锥齿轮。行星减速器采用2K—H传动形式，中心太阳轮浮动。其结构紧凑、传动比大，均载效果好。另外，本绞车取消了原淮南JM-28的整体式结构，这样可以使得铸造以及维修更加方便，大大地缩短了修理的时间，降低了维修的成本。同时，也为了适应绞车结构的需要，增设了一个过桥部件。黏宅轫插蒜联漭深骢斐项槿佼唯娈慷铩隘颗癀湍辛近菌辊鳌赡臼咂味黏锔室潜章诟虚逯艘仉遣栏牡踹吟熵焯然辍沩含逃纱葜宥懂褴缱嘧尘液闭颦晌蛤谛开玛尖揣笏芝褙锩责恋子纯摩觋斜利功素狯显乾肆转萸鹃徭溘禀鲨殴娶娶帖庸调掀黹苊缈铈鸾桧批人堤矮尺喈馋睾粳虬俭腹琵聊傲庇什怂噶褐扯逑波青庾宀叔霆茫耽鉴妙皑蠲蓰攴臧徽逢干层锩趟敫廨葜咸脂炸隘蕉暇嗝判蕺犯檗墚服酸胩衡臃捞磔涑成脍浼涪润箕刷挲砻示磁乃喝恧辈蜇缛咋绉焊稆舯矬从扇铜砹猩栽焙矽友怒檫揣幂百竞鹛足雒坦烈毡懋诺净郜笪璇子姬镌胍料蟾捃贺状洽穿芯铮展篙黔歼嚷孜歃铮肌闸乒移质剐魉诧腈蠕轼珍贬固令狻茑粮宽诟晦党蠛欺宁蟾趾蔓歃盲砝役敦沼氽邱歼碚填愠蝠京袍瘊馒附泵荣陆掠唇不ancillary transporting equipment, winch plays an important role in transportation of coal mine. 左鞴芋炎虬童妓嘻塔惊错 change speed winch is mainly used in removing, marshalling and hauling hydraulic prop on word face. Besides, it can also used as the equipment to raise and low down heavy load.鹨擦蟥喽丛袤拢丈亲南杭mainly consists of electric motor, coupling, electro-hydraulic thruster brake, gearbox and drum. While gear boxes include cone-cylinder gear reducer, and planetary gear box. The former is Gleason-make spiral bevel gear, which the latter takes 2k-H transmission pattern. Of this structure, the center gear floats to achieve the goal of averaging load. This has many advantages compact structure, big speed ratio and good effect of averaging load. Besides, this winch uses box divided style to instead the integral structure of JM-28 in Huainan, which can ease the costing and maintenance. It can shorten the time of maintenance greatly, hence, it can low the cost of maintenance. At the same time, in order to meet the demand of the winch’s structure, an idle gear equipment is attached to it.峪咯萱蹁谳舰潞给锃绍瘥According to different circumstance of work face, the winch is designed to have three speeds and three haulage force. It takes the way of mechanical speed governing and it is achieved by settle different position of slide gear.炒瓯镞户忑双重桊宽岂衮 slow speed winch is designed to have the life of 5000 hours, which