培训课件_起搏器程控随访准备讲课用.pptVIP

The device looks for up to 10 seconds for a P-wave, then proceeds to look for up to 10sec for an R-wave. The 10 seconds test is over after one intrinsic event is measured baseline-to-peak that exceeds the programmed sensitivity. If a patient does not have intrinsic conduction within that 300ms interval, a P-wave value will be recorded and R-wave will display paced in (PDM) or N/R in (Insignia, PII, DII). Like the Vigor, if the test is repeated, (for example in VVI mode) in order to obtain an R-wave, the results from the second test will write over the initial P-wave. Pacemaker wenchebach:起搏