钻井液搅拌器工况参数检测方法研究.docVIP

Master’s Thesis 论文题目 钻井液搅拌器工况参数检测方法研究 摘要 在石油工程钻井施工中，钻井液搅拌器是非常重要的固控准备之一。针对目前对钻井装备工况参数检测设备不足的现象。本论文在广泛调研和分析国内外搅拌器检测方法的基础上，融合现代传感器和无线数据传输等技术，提出了一种基于无线数据传输的钻井液搅拌器工况参数检测方法，设计并完成了用于钻井液搅拌器检测的无线应变传感器，组建了搅拌器无线扭矩测试系统、超声波测距系统，可实现钻井施工与检测参数同步进行。 论文在归纳分析了搅拌器测试方法，分别从硬件和软件两个方面进行研究。详细阐述了无线应变传感器及测试系统的设计与开发过程。基于模块化设计，使用高性能单片机设计了搅拌器无线应变传感器的信号调理单元、微处理单元、无线收发单元并进行标定和调试。构建了无线传输系统，使用力控6.0开发了上位机程序，实现了模拟搅拌器的人机界面及数据显示功能。 本文提出的搅拌器工况参数整体检测和无线传输方法，可对搅拌器工况参数进行实时检测，还对钻井液密度的同步测试方法进行了初步探索。论文研究成果为今后固控固控装备工况参数的整体监测，拓展钻录井参数类别提供了有实用意义的方法。 关键词：搅拌器；扭矩；超声波测距；无线应变传感器；钻井液 Abstract Drilling fluid blender is one of the most important Solids Control Equipments of the drill operation facilities in Petroleum engineering drilling construction. Aiming the shortage of Drilling equipments and working parameters testing equipments. On the bases of extensive research and analysising in the domestic and foreign blender detection method, plus techniques such as Modern sensor and wireless data transmission, this thesis puts forward a method of Drilling fluid blender working parameters test on account of Wireless data transmission. Designed and finished the Wireless strain sensor which used in drilling fluid blender detection and formed the blender wireless torque test system、ultrasonic distance system, which synchronized the drilling construction and inspection parameters. This thesis analyzes blender testing method from two aspects respectively in hardware and software. Expounded the design and development process of wireless strain sensor and test system. In modular design, using high performance microprocessor design the blender wireless strain sensor signal disposal unit, micro processing unit, wireless transceiver unit to calibrate and debug. Constructs the wireless transmission system, using force control 6.0 developed PC program, realized the simulation blender human-machine interface and data display function. The proposed blender working param