本科毕业设计__舞台车车架有限元分析说明书.docVIP

河 北 工 业 大 学 毕业设计说明书(论文) 作 者： 白景春 学 号： 100288 学 院： 机械工程 系(专业)： 车辆工程 题 目： 舞台车车架有限元分析 指导者： 周志革 教授 (姓 名) (专业技术职务) 评阅者： 教授 (姓 名) (专业技术职务) 2014年 6 月 5日 毕业设计（论文）中文摘要 舞台车车架有限元分析 摘要 流动舞台车是一种方便流动演出的可展开成为的特种汽车它主要部分和上装部分两大部分，上装部分由顶板侧板底板组成，而侧板和顶板分别由四控制展开即成舞台的台顶，底板四个液压控制成舞台，省去传统搭台程序，省时省力操作简便安全可靠，功能齐全外观美观 毕业设计（论文）外文摘要 THE FINITE ELEMENT ANALYSIS OF THE STAGE VEHICLE STRUCTURE Abstract Car Flow stage s a convenient mobile performance, can become a performance stage special car. It mainly includes the chassis parts and jacket of two parts, the top part is composed of roof side panel floor, and the side panel and roof respectively by four hydraulic oil cylinder control in the stage of table top, bottom plate is controlled by four other hydraulic oil cylinder expansion stage, eliminating the traditional plays procedure, not only safe and reliable operation of the save Labour when the province, and complete functions and beautiful appearance. Car frame based on the stage as the research target, provide technical support for engineering practice. First of all, the frame to make use of drawing software UG modeling, using NASTRAN finite element analysis was carried out on the frame, the analysis mainly includes the static characteristic analysis, dynamic characteristics analysis, it is concluded that the stress of the nodes stress and maximum of maximum deformation under the specified load, compared with the technical requirements for frame, thus come to the conclusion that the frame under specified conditions of security and stability. Keywords： stage vehicle finite element analysis NASTRAN UG 目 录 1 引言 1 1.1课题背景 1 1.2现阶段研究状况 4 1.3舞台车技术的现状和发展趋势 5 1.4课题目的 6 2.有限元分析 9 2.1有限元分