16对设计方法的快速检查概论.docVIP

16 Quick Check Design Methods对设计方法的快速检查 1 INTRODUCTION 前言 The design of pneumatic conveying systems is usually carried out on the basis of scaling data obtained from the pneumatic conveying of the material to be transported. If previous experience of conveying a given material is not available, data is generally derived for the purpose by conveying the material through a test facility, as discussed in detail in the previous chapter. Most manufacturers of pneumatic conveying systems have such test facilities for this purpose.气力输送系统的设计通常是在从这种物料的气力输送过程中获取的缩放数据的基础上进行的。如果输送某种物料时没有以往经验可以利用，通常要在试验装置中