Packing派克密封件培训.pptVIP

Parker 密封件技术交流会 Content目录 Parker Seal Group Introduction 密封集团介绍 Sealing theory 密封原理 Wiper, Rod seal, Piston Seal and Guide Ring Introduction 防尘圈，杆封，活塞封和导向环的介绍 Seal Application in several kinds cylinder 密封组合在几种油缸中的应用 Packing Failures Analysis 失效性分析 Basic Seal Theory Principles基本密封原理 Linear, Reciprocating Systems 线性,往复运动系统 Rotating Shaft Systems旋转运动系统 For application where no leakage is allowed, a contact sealing element is used. 实际应用中，当不允许有泄漏发生时，那么就必须应用一个密封系统。 The 5 Critical Areas of Reciprocating Dynamic Sealing 影响往复运动密封的5个关键因素 Friction摩擦 Wear磨损 Sealability密封性 Extrusion挤出 Stability稳定 Seal Friction摩擦 Seal Friction is a function of the Radial Force the seal exerts on the moving part and the Coefficient of Friction between the two materials.摩擦是密封件施加在运动部件上径向力以及两接触材料摩擦系数作用的结果 Fluid Pressure介质压力 Amount of Squeeze挤压力 Seal Material Stiffness密封材料硬度 Squeeze vs. Lip Seal挤压或唇口密封 Lip Shapes唇口 Temperature温度 Seal Material Choice密封材料 Dynamic Surface Finish运动表面光滑度 Lubrication润滑度 Temperature温度 Pressure Increases Radial Frictional Force压力增加径向摩擦力 Radial Squeeze Increases Radial Frictional Force径向挤压增加径向摩擦力 Solid Material Squeeze Increases Radial Frictional Force挤压实心材料增加径向摩擦力 Seal Wear密封磨损 Factors That Will Increase Seal Wear增加密封磨损的因素 Coarse Surface Finish粗糙的表面 High Pressure过高的压力 High Temperature过高的温度 Lack of Lubrication缺乏润滑 High Lip Contact Forces (also increases friction)过高的唇口接触力 Poor Wear Resistant Material 不抗磨损的材料 Abrasive Fluid or Contamination 污染或研磨液 Hardened Surface Coatings (PTFE)较硬的表面涂层 Wear Resistance of Seal Materials密封材料的耐磨损性能 Types of Failure Modes失效形式 Axial grooves - same cylinder, rod allowed to turn. 轴向沟槽-同样的可以转动的缸和杆 Polyurethane聚氨酯 vs. Rubber橡胶 Effects of Friction on Seal Life摩擦对密封寿命的影响 How To Calculate % Squeeze如何计算挤压量 The Lip Seal Concept 唇形密封概念 How Pressure Affects Sealability压力是如何影响密封性能的 Material Characteristics For Good Sealability 密封性能好的材料特点 Low Modulus of Elasticity低弹性模量 High Resilience高耐介质性 Low Surface Har