机械毕业设计（论文）-X-Y工作台设计（全套图纸）.doc

本科毕业论文 题 目： 院 系： 专 业： 班 级： 学生姓名： 指导教师： 论文提交日期： 论文答辩日期：  摘 要 全套图纸，加153893706 　 装备工业的技术水平和现代化程度决定着整个国民经济的水平和现代化程度 ,数控技术及装备是发展新兴高新技术产业和尖端工业的使能技术和最基本的装备 ,又是当今先进制造技术和装备最核心的技术。数控技术是用数字信息对机械运动和工作过程进行控制的技术 ,而数控装备是以数控技术为代表的新技术对传统制造产业和新兴制造业的渗透形成的机电一体化产品 ,其技术范围覆盖很多领域。X—Y工作台的传动方式为保证一定的传动精度和平稳性以及结构的紧凑，采用滚珠丝杠螺母传动副。为提高传动刚度和消除间隙，采用有预加载荷的结构。由于工作台的运动部件重量和工作载荷不大，故选用滚动直线导轨副，从而减小工作台的摩擦系数，提高运动平稳性。 关键词：  Abstract The rapid development of electronic technology in todays world, a microprocessor, microcomputer technology in various fields has been widely used in various fields for the development of technology has played a great role in promoting. A new generation of CNC systems such typical mechatronics products are moving towards a high-performance, intelligent, systematic and lightweight, miniaturization direction. Vertical milling and horizontal milling machine compared to the major difference is that the vertical spindle arrangement, except for the different arrangement of the spindle, the table can be up and down, vertical milling cutter with relatively flexible, wider scope. You can use mills, floating cutter, drill and so on. Ergonomic machine design, easy to operate; use the operator panel Symbols design, simple and intuitive. 牋燭echnology and modernization of the equipment industry determines the level and degree of modernization of the entire national economy, numerical control technology and equipment is the development of new high-tech industry and cutting-edge technology and industry enabling the most basic equipment, is nowadays advanced manufacturing technology and equipment core technology. CNC technology is a mechanical movement with digital information and work process control technology, CNC numerical control equipment is new technology, mechatronics technology represents for traditional manufacturing industries and emerging manufacturing Penetration of its technology coverage many areas.