在NIM中用mksysb恢复客户端系统.docVIP

在NIM中使用mksysb恢复客户端系统 ? ? 内容提要: 1. 首先在客户端做mksysb，并将备份设备指定为本地的一个文件。smitty mksysb* Backup DEVICE or FILE [/mksysb/mksysb.0714] Create MAP files? noEXCLUDE files? noList files as they are backed up? noVerify readability if tape device? noGenerate new /image.data file? yesEXPAND /tmp if needed? noDisable software packing of backup? noBackup extended attributes? yesNumber of BLOCKS to write in a single output [] 然后回车开始备份。完成后，将/mksysb/mksysb.0714文件通过ftp上传到NIM服务器端的一个先期创建的指定文件系统内,比如/mksysb 2. 在NIM服务器端的配置 2.1 将client端的主机名和IP添加到/etc/hosts，并确保该主机名能被正确解析，并创建两个文件系统/mksysb和/spot 2.2 smit nim--Configure the NIM Environment--Advanced Configuration--Initialize the NIM Master Only--在network name处输入nim，在Primary Network Install Interface选择一个能够和客户端通信的网络接口，回车 * Network Name [nim]* Primary Network Install Interface [en0] Allow Machines to Register Themselves as Clients? [yes]Alternate Port Numbers for Network Communications(reserved values will be used if left blank)Client Registration []Client Communications [] 2.3 smit nim--Perform NIM Administration Tasks--Manage Machines--Define a Machine--在Host Name of Machine处输入client主机名，回车 * NIM Machine Name [NIMClient]* Machine Type [standalone]* Hardware Platform Type [chrp]Kernel to use for Network Boot [mp]Communication Protocol used by client []Primary Network Install Interface* Cable Type bncNetwork Speed Setting []Network Duplex Setting []* NIM Network nim* Host Name NIMClientNetwork Adapter Hardware Address [0]Network Adapter Logical Device Name []IPL ROM Emulation Device [] 2.4 smit nim--Perform NIM Administration Tasks--Manage Resources--Define a Resource--选择mksysb--在Resource Name处输入NIMClient_mksysb,在Server of Resource处选择master，在Location of Resource处选择/mksysb/mksysb.0714，回车 * Resource Name [NIMClient_mksysb]* Resource Type mksysb* Server of Resource [master]* Location of Resource [/mksysb/mksysb.0714]Comments [] Source for Replication []-OR-System Backup Image Creation Options:CREATE system