本科毕设论文—变压器差动保护的研究.docVIP

毕业论文 变压器差动保护的研究 [摘要]电力变压器作为联系不同电压等级网络的设备，是电力系统中非常重要的元件。长期以来电力变压器一直只采用差动保护作为内部故障的主保护。因此，差动保护的可靠性和安全性对变压器保护来说最为关键。其中励磁涌流的识别一直是研究的热点，国内外许多研究人员做了大量工作，也取得了许多成果。由于变压器励磁涌流受变压器铁心剩磁、饱和磁密、系统阻抗、接线方式、铁心结构、合闸初相角等因素影响，所以这些方法都不能保证百分之百的可靠性，鉴别励磁涌流的问题成为制约变压器差动保护能否正确和灵敏动作的瓶颈。本文研究了变压器产生励磁涌流的机理，分析了几种鉴别励磁涌流方法的优缺点。针对二次谐波制动原理存在着不着之处，提出了基于等效瞬时电感鉴别励磁涌流的方法并用MATLAB/SIMULINK建立了仿真模型，对变压器在不同合闸角、不同剩磁的情况下进行了大量仿真。仿真结果表明基于等效瞬时电感鉴别励磁涌流的方法能够有效鉴别变压器的内部故障和励磁涌流，具有一定的实用价值。 [关键词]变压器 差动保护 MATLAB/SIMULINK 励磁涌流 等效瞬时电感 仿真 Expioitation transformer differential protection Li Xin (Grade06 Class3,Major Electric engineering，Dept.，Shaanxi University of Technology，Hanzhong 723003，Shaanxi) Tutor：Yang Linxia Abstract： Power transformers as very important elements in power system require very reliable protection has been adopted as main protection against inner fault of transformer for a long time , since it has high reliability and high sensitivity, which are most important for transformer protection. Identification of inrush current has been a key problem to be resolved.Many researcheres have done a lot of work on this aspect.Because the inrush current of transformer is influenced by many factors such as residual flux of iron core,saturation flux density,system impedance,mode of connection,iron core structure,closing angle and so on,but all of the proposed methods can’t make sure 100%reliability, Identification of inrush current is the most critical factor that limits differential protection operation. In this thesis , the mechanism of inrush current occurring in transformer is well researched , the advantages and disadvantages of several methods for checking inrush current are discussed. Based on equivalent instantaneous inductance to discriminate between internal fault current and inrush current is put forward in this thesis . A numeric simulation model is built with the simulation software SIMULIINK based on MATLAB , numerous simulations are carried out on an connected transformer with differe