博科交换机配置指导手册.ppt

Main Message VRRP-e and VRRP are router services and need to be enabled Having configured the ip address of the port or VE, assign a vrrp-e vrid to the interface then assign an ip address and packup priority and track priority. Finally nominate a track port Command Line Entry Configure one of your router ports for VRRP-E as per the commands in the slide KEY POINTS Note that the command backup priority 160 track-priority 20 causes problems as there is no – in between backup and priority but there is between track-priority Although not in the simulator the ere is an additional parameter call