《JH31-315机械压力机传动系统的设计》.docVIP

摘要通过对机械压力机的国内外研究现况的分析，确定了本课题的主要设计内容。在确定了机械压力机初步设计方案后，决定采用传统理论方法对JH31-315机械压力机传动系统进行设计、计算、强度校核，采用AutoCAD设计软件对大齿轮、小齿轮、偏心轮、连杆、总装图进行了工程绘图，同时还对JH31-315的主要零件进行了绘图。在参考了某公司生产的JH31-315机械压力机传动系统以及查阅了大量关于机械压力机传动系统设计的书籍后，确定了机械压力机的传动系统的设计方案，绘制了传动系统原理图，给出了传动系统的工作说明书，并对其进行了可行性分析，最后对整个设计进行系统分析，得出结论整个设计切实可行。关键词 机械压力机；传动系统；强度校核AbstractAnalysis of the compressive stress mechanism’s domestic and foreign research existing circumstance,determins this topic main design content.After I had determined the enginery compressive stress mechanism preliminary design plan,decided uses the traditional theory method to carry on the design,the computation,the intensity examination to the JH31-315 mechanical press transmission system,used AutoCAD design software to the gearwheel,pinion, eccenter,connecting rod,the final assembly drawing has carried on the project cartography, meanwhile has carried on the mapping to the master accessory.In has referred to JH31-315 mechanical press transmission system which some company produces as well as has consulted massively after the mechanical press transmission system design books,the definite mechanical press transmission system design proposal,has drawn up the system schematic diagram,has produced the transmission system working instructions,and has carried on the feasibility analysis to it,finally carries on the system analysis to the entire design,obtains the entire design to be practical and feasible.Keywords mechanical press transmission system intensity 目 录 TOC \o 1-3 \h \z HYPERLINK \l _Toc256000000 1 绪论叵庶事沁心谚蜕凉购慈福苏维莨 PAGEREF _Toc256000000 \h 0 HYPERLINK \l _Toc256000001 1.1 机械压力机发展概况赳瓜盈茭袱苁认寒惆衮雀顸椴胗 PAGEREF _Toc256000001 \h 0 HYPERLINK \l _Toc256000002 1.2 机械压力机工作原理及主要技术参数锃洚髁迅笾按永浪篑频芷沥娶沪 PAGEREF _Toc256000002 \h 1 HYPERLINK \l _Toc256000003 1.3 机械压力机分类弈犭秒酆笪纬豺鹧式蹂揉骚绠鲢 PAGEREF _Toc256000003 \h 3 HYPERLINK \l _Toc256000004 1.4 机械压力机研究现状司贯倮闳拘渍恹慝杨答仅戮氆崂 PAGEREF _Toc256000004 \h 5 HYPERLINK \l _Toc256000005 1.4.1 锻压设备在国民经济建设中的作用麽急锈蚁脸馊南靥滥探绅奘缶计 PAGE