《毕业设计(论文)－组态王技术在铣打机床中的应用》.doc

常州工程职业技术学院 毕业设计报告（论文） (2011届)题目： 组态王技术在铣打机床中的应用所 属 系： 机械工程技术系班级： 机电0831学 生 姓 名：学号：同 组 成 员：指 导 教 师：摘 要 随着工业自动化水平的迅速提高，人们对工业自动化要求种类繁多的控制设备和过程监控装置在工业领域的应用，使得传统的工业控制软件已无法满足用户的各种需求基于国产组态软件——组态王，利用 关键词：图形界面系统 组态王 监控系统 Abstract With the industrial automation speedily developed, computers are widely used in industry. People are requiring more and more to industrial automation and many kinds of control equipment and procedure monitor device are used in industry, which made the conventional industrial control soft can’t satisfy all kinds of requirement of the users. The two capital parts of performance system of mechanical processing are interface and communication. The good configuration software can combinate the two parts well to performance the fact system of thermal power station. This paper describes the whole frame and design of configuration software. The system can change state itself along with following condition and show supervisory control interfaces so it can easily control and supervise the fact system. It also reduces the request of operators, perfects the control procedure, makes control procedure more automatic, and then avoid some dangerous actions. For the sake of better realization to control and supervision, this paper based on domestic configuration software Kingview and by using VB programming and DDE linkage, display and control are implemented in one computer. Thus a low cost and good performance system is obtained. Keywords：Graphical interface system Kingview performance system 目录 1 绪论 1 1.1 组态软件 1 1.2 组态软件的发展 1 1.3 组态软件的特点 2 1.4 组态王概述 3 2 组态机床的制作 5 2.1 z8210铣打机床介绍 5 2.2 z8210铣打机床的动作要求 5 2.3 组态王建立应用工程的一般过程 6 2.3.1 z8210铣打机床的组态王制做步骤 6 2.3.2 组态王连接设备 9 2.4 z8210铣打机床的组态王数据词典 14 2.4.1数据词典中变量的类型 14 2.5 组态王的应用程序命令语音 16 2.5.1 表达式和运算符 16 2.6 动画连接 18 3 机床的电气系统设计 20 3.1 机床的电气控制要求 20 3.2 z8210铣打机床PLC 控制系统的分析 20 3.3 PLC外部接线图 22 3.4 PLC程序 24 结 论 25 致 谢 26 1 绪论 本章主要介绍本论文的选题背景、组态软件的现状和发展趋势，及国产组态软件——组态王的功能特点，并且简要介绍基于组态王的数控加工过程监控系统。 1.1 组