Introduction简介Mission宗旨CEMARisstrivingtobecome本中心.docVIP

Introduction：简介Mission: 宗旨CEMAR is striving to become 本中心力求发展成为: A Technical Platform to serve the PRD industries for enhanced international competitiveness. 珠三角工业界的公共技术支持平台。 An Education Facility to continue our practice of teaching excellence at HKUST Nansha campusto nurture innovative and creative engineers.培养具创意工程技术人员的教育中心。 A Gateway to the major RD projects from the central/local government, funding agencies andmulti-national companies.连接科研人员、先进技术和工业界的桥梁。Equipments: 仪器设备 Materials Preparation and Characterization 材料制备和表征仪器Reliability Test Equipments可靠性测试设备Equipments in HK 在香港的有关设备 Materials Characterization 材料表征Reliability Test 可靠性测试 Nano-indentation纳米硬度测量Ball shear and wire pull tests推球和拉线试验 Dynamic SIMS动态二次离子质谱仪Highly accelerated stress test (HAST) TOF-SIMS飞行时间二次离子质谱仪高度加速载荷试验 XPS AES X光电子能谱仪和俄歇电子能谱仪Temperature/humidity/bias test (THB) TEM透射电子显微镜温度/湿度/偏压试验 Surface wetting measurement表面浸润性Surface roughness measurement表面粗糙度Materials Processing 材料加工Single-screw extruder单螺杆挤出机Twin-screw extruder双螺杆挤出机 Hot press machine热压机 Failure Analysis 失效分析C-SAM扫描超生波显微镜X-ray Imaging Inspection X射线影像检测单球测试机 Technology Service: 技术服务项目 Computer Simulation 计算机模拟 Thermal-induced stress and deformation 热致应力应变模拟 Stress contribution in complicated structure 复杂结构中的应力分布 Material Characterization 材料特性测定 Mechanical properties determination such as modulus, mechanical strength, fracture toughness 材料的力学性能测定，如模量，机械强度和断裂韧度 Measurements of transition temperatures (glass, melting, vaporization) 材料各种转变温度的测定，如玻璃化转变温度，熔融温度，气化温度 Characterization of the curing profile of polymers树脂的固化曲线的测定 Measurements of coefficient of thermal expansion (CTE) 热膨胀系数的测定 Composition (including moisture, solvent, filler content) determination 材料成分（包括水分，溶剂，填料含量）的测定 Decomposition and oxidation材料的分解和氧化 Elemental analysis元素分析 Hardness measurements材料硬度的测定 Surface wetting (contact angle) measurement表面湿润性测量 Surface Roughness Measurement表面粗糙度测量 Structure determination, such as low k/Cu die str