1-TPM---OEE培训材料.pptVIP

* If something is inaccessible then chances are it will not get done. We want to eliminate all inaccessible areas and hard to get to locations. * * Please note the grease fitting on the outside of the gear housing. Before TPM this grease fitting was in the inside of the gear housing which was not accessible to the operator. During the TPM exercise a hole was bored in the casting and the grease fitting plumed to the outside making it accessible. * There are many ways to eliminate inaccessible and hard to reach areas and some are very simple, others may require a little more effort and time but