AVR单片机定时器计数器三.docxVIP

T/C2: 8位定时器/计数器，可产生无输出抖动、相位可调的脉宽调制信号。FOC2强制输出比较：仅在WGM指明非PWM模式时才有效。但是，为了保证与未来器件的兼容性，使用PWM 时，写TCCR2 要对其清零。写1 后，波形发生器将立即进行比较操作?TNCT2计数寄存器：通过它 寄存器可以直接对计数器的8 位数据进行读写访问OCR2输出比较寄存器：输出比较寄存器包含一个8 位的数据，不间断地与计数器数值TCNT2 进行比较。匹配事件可以用来产生输出 比较中断，或者用来在OC2 引脚上产生波形。T/C1 真正的16位定时器/计数器，能够输出16位的PWM，有两个独立的输出比较单元。具有输入捕捉功能。捕捉输入：用于精确捕捉一个外部事件的发生，记录事件发生的时间印记，如：精确测量脉冲宽度。FOC1A/FOC1B只有当WGM13:0指定为非PWM模式时被激，对其写1后，波形发生器将立即进行比较操作。ICES1:该位选择使用ICP1 上的哪个边沿触发捕获事件。ICES 为0” 选择的是下降沿触发输入捕捉； ICES1 为1” 选择的是逻辑电平的?上升沿触发输入捕捉。输出比较寄存器1A ：16位，由OCR1AH,OCR1AL组成输出比较寄存器1B：16位，由OCR1BH,OCR1BL组成 该寄存器中的16 位数据与TCNT1 寄存器中的计数值进行连续的比较，一旦数据匹配，将产生一个输出比较中断，或改变OC1x 的输出逻辑电平。输入捕捉寄存器：16位，由ICR1H,ICR1L组成，当外部引脚ICP1(或T/C1的模拟比较器)有输入捕捉触发信号产生时，计数器TCNT1中 的值写入ICR1 中。ICR1 的设定值可作为计数器的TOP 值。?小企鹅diy科学探究学习网 更多相关文章转到：?/wqb_lmkj/blog/wqb_lmkj/blog? 文章分类下的单片机staff and workers representativesThe representatives of the staff and workers from the unit or away from retirement, on behalf of automatically disqualified, on behalf of the delegation to the original vacancy shall be in accordance with the provisions of the election.Replace the fourteenth representatives of the staff and workersThere are the representatives of the employees, who have the right to change the unit:1, due to illegal law and discipline punishment;2, often without reason not to participate in the activities of the staff representatives of the staff and the organization of the work of the organization, a serious dereliction of duty;3, because of unpaid leave, sick leave and long-term, full-time study and so on, not to participate in the activities of the post of the staff and workers congress;4, removed from the unit, from the original delegation.The rights of the representatives of the fifteenth employeesFirst, the incumbent will have the right to vote in the election, the right to vote and the right to vote.Two, have the right to participate in the Congress and its working mechanism in the company. Check all relevant departments to carry out the workers congress resolution and prop