LCD2004液晶屏参数.docxVIP

3D打印机 Reprap Ramps 1.4 2004LCD智能控制器产品特点：1.采用大屏幕LCD 2004.2.背部集成SD卡座，切片文件放入SD卡后，在LCD上选择对应的文件就能打印。3.产品自带编码器，可以实现参数调节，和文件选择打印！4.ramps上即插即用，但需要修改固件以支持。套件发货清单：1.RAMPS LCD2004 主板1个2.L型转接板1个3.FC排线2条100%实物拍摄：产品说明： 该智能控制器包含一个SD读卡器，旋转编码器和一个20字符×4行LCD显示屏。你可以很容易将它连接到您的RAMPS 1.4板使用“智能适配器”列入。?此面板连接您的RAMPS 1.4后，你不需要你的电脑，你的SD卡智能控制器供电。更进一步的所有操作，如校准，轴运动可以做到的只是用旋转编码器的智能控制器。无需电脑打印3D设计，只需用G代码设计存储在SD卡上ramps上即插即用，但需要修改固件以支持，以Marlin为例，把已经注释的这两行取消注释，编译下载到板子即可使用了。在Configuration.h文件中搜索//#define REPRAP_DISCOUNT_SMART_CONTROLLER将最前面的两个斜杠删除，变为#define REPRAP_DISCOUNT_SMART_CONTROLLER重新编译下载就可以用了附：2004LCD详细说明书补充：在用SD卡切片的之后，保存在SD卡里的时候一定要用英文名字，用汉字命名在SD卡里面就会出现TEST，因为SD卡的内部构造是英文的，所以，在切好片的模型也要用英文或者拼音来命名。staff and workers representativesThe representatives of the staff and workers from the unit or away from retirement, on behalf of automatically disqualified, on behalf of the delegation to the original vacancy shall be in accordance with the provisions of the election.Replace the fourteenth representatives of the staff and workersThere are the representatives of the employees, who have the right to change the unit:1, due to illegal law and discipline punishment;2, often without reason not to participate in the activities of the staff representatives of the staff and the organization of the work of the organization, a serious dereliction of duty;3, because of unpaid leave, sick leave and long-term, full-time study and so on, not to participate in the activities of the post of the staff and workers congress;4, removed from the unit, from the original delegation.The rights of the representatives of the fifteenth employeesFirst, the incumbent will have the right to vote in the election, the right to vote and the right to vote.Two, have the right to participate in the Congress and its working mechanism in the company. Check all relevant departments to carry out the workers congress resolution and proposal to implement the situation, have the right to the right to participate in the personnel of the company lea