MAX1452的问题解答.docVIP

MAX1452支持工业典型标准的4-20mA应用。窄带Σ-Δ应用通常利用数字滤波器提供50Hz、60Hz或50Hz/60Hz的噪声抑制。 问：则将显著地增加系统成本及复杂性。这些信号调理器的传感器激励模式是什么?答：and laser-trimmed resistors were used. Among the major problems with this approach are the following: Restricted accuracy of compensation resulting from the sensors nonlinearity High cost of laser trimmers and other automated equipment Multiple setups usually required for test and trim High component count preventing miniaturization The second generation of compensation devices,默认模式是电流桥驱动。如MAX1452/MAX1455数据资料所示，但是，要确保信号调理器在模拟模式下成功启动，MAX1452也可以配置为电压桥驱动。从而获得电桥激励电压反馈。ISRC和BDR引脚短路在一起可以实现这一配