压力容器工程项个规定.docxVIP

压力容器工程规定Engineering Specification for Pressure VesselsC O N T E N T S目录1. GENERAL概述1.1 Scope范围1.2 Codes, Standards and Regulations规范、标准及规章1.3 Units单位1.4 Purchaser’s Drawing and Documents买方图纸及文件1.5 Vendor’s Drawings and Documents卖方图纸及文件1.6 Site Condition现场条件2. DESIGN设计2.1 Design Pressure设计压力2.2 Design Temperature设计温度2.3 Corrosion Allowances腐蚀余度2.4 Materials材料2.5 Loading Conditions and Strength Calculation负荷条件及强度计算2.6 Tolerances允许偏差3. DETAIL DESIGN详细设计3.1 Shells and Heads容器壁及顶3.2 Internals内件3.3 Nozzles and Manholes设备口及人孔3.4 Bolts, Nuts and Gaskets螺栓、螺母及垫片3.5 Supports支架3.6 Miscellaneous其它4. FABRI