试论全站仪竖轴补偿器和补偿器零位误差.docVIP

试论全站仪竖轴补偿器和补偿器零位误差 虞积强 （合肥工业大学 土木与水利工程学院，安徽，合肥，230009） 摘要：全站仪在进行角度测量时，如果竖轴倾斜，就会给水平角和竖直角的测量带来误差，同时，如果全站仪补偿器存在零位误差，也会给测角带来误差。本文介绍了全站仪补偿器和补偿器零位误差的概念和原理。 关键词：全站仪竖轴倾斜；补偿器；单轴补偿；双轴补偿；全站仪补偿器零位误差 On Vertical Axis Compensator and Compensator Zero Position Error of Total Station Yu Ji-Qiang (Hefei University of Technology ，Department of Civil and Hydraulic Engineering Institute, Anhui, Hefei, 230009) Abstract ： During angle measurement, if the Total Station vertical axis tilting, it will give horizontal angle and vertical angle measurement error, at the same time, if the total station have zero