金属探a测作业指导书3.docVIP

METAL DETECTION PROCEDURE 金属探测步骤 Metal detectors must be checked before production commences, during and at the end of production to ensure all aspects of operation and sensitivity as specified below: Test Piece Type Sensitivity Test Piece Frequency of Test Ferrous xxmm ? Non-ferrous xxmm ? 必须在开始生产之前，生产过程中及结束的时候对金属探测器进行检查，以确定其操作的各个方面和敏感度，具体如下。 测试片类型 测试片敏感度 测试频率 铁的 xxmm ? 非铁的 xxmm ? The metal detection test should be carried out each hour by the metal detector operative and verified periodically by QA. Any stoppages in production must be recorded on the Metal Detection (CCP3) record