phoenics学习资料读取CAD.docVIP

将PHOENICS读取AUTOCAD 的文件步骤 AUTOCAD, PHOENICS, 文件 phoenics 有与cad的接口，允许在cad中画出的图形文件导入vr， 从而方便用户的使用， 但是他也有一定的非一般要求， 1、在AUTOCAD下生成“三维实体”，X、Y、Z必需为正值。 2、在命令状态输入：STLOUT 3、SELECT OBJECT 4、不要保存成二进制 5、保存到\PHOENICS\D_PRIV1目录 6、进入PHOENICS程序，读取AUTOCAD文件 7、结束 用CAD画图导出图形的时候，不应采用菜单里的EXPORT命令，而采用命令形式 “ command状态输入命令: stlout AutoCAD文件存为STL格式，注意选ASCII码，不要选BIN格式，同时注意单位转换问题，可以传入Phoenics中。” EXPORE命令导出的时候就是ASCII码。 Accessing PHOENICS-VR From the system level: To enter the PHOENICS-VR environment, click on the PHOENICS icon on the desktop, or click on Start, programs, PHOENICS, PHOENICS. In PHOENICS-VR environment, Start with an ‘empty’ case - click on File then on Start New Case, then on Core’, then click on ‘OK’ to confirm the resetting. To enter VR Editor: This is the default mode of operation . ? Within VR Editor. Set the domain size, and activate solution of the required variables: Click on Main Menu and then on Geometry. Change the X-Domain Size to 2.0 m. Click OK to close the Grid mesh settings dialog. Click on Models. Set the solution for velocities and pressure ON. Click on energy equation, and select Temperature as energy formulation. Click on OK. Click on Total whereby it changes to Static. Click on Top menu, then on OK to exit the Main Menu. ? Create the WALL-H object: Click on New Object. Change name to WALL-H (which stands for high wall). Set POSITION and SIZE of object as: Xpos: 0.0 Xsize: 2.0 Ypos: 0.0 Ysize: 1.0 Zpos: 0.95 Zsize: 0.05 Select Type: Blockage (default). To change the material, click on Attributes, click on ‘Types’, click on SOLIDS then ‘OK’, and then on ALUMINIUM at 27 deg C and ‘OK’. Click on OK to exit the Attributes menu, and on OK to close the Object Dialogue Box. ? Create the WALL-L object: Click on New Object. Change name to WALL-L (which stands for low wall). Set POSITION and SIZE of object as: Xpos: 0.0 Xsize: 2.0 Ypos: 0.0 Ysize: 1.0 Zpos: 0.0 Zsize: 0.05 Define Type: Blockage (default). Click on Attributes, select material as ALUMINIUM as above